2100 Medio LED floor light, 14.5 W, 4000K

Medio 2100 LED recessed floor light, 14.5 W - 3,000 K / 4,000 K / 5,000 K- beam angle 30° - tilting look The casing of this LED recessed floor light is made of corrosion-resistant die-cast aluminium with a polyester powder coating. The closing ring is made of AISI 316L stainless steel (especially corrosion resistant) and the cover plate is made of hardened, highly transparent glass with a thickness of 15 mm which means the light can withstand a weight of up to 2000 kg and has an IK 08 break resistance. The special IP68 Full Dry construction with a special seal prevents condensation forming inside the light and also prevents earth moisture penetrating via the power cable. The symmetrical beam angle of 30° and the tiltable look (+/- 15°) in conjunction with the three different versions available - 3,000 K, 4,000 K or 5,000 K - always generates ideal light distribution and a light atmosphere customised to the surrounding architecture. The particularly high-quality finish and look is completed by the A4 stainless steel screws. The electrical connection of the light occurs by means of the pre-assembled cable (1 m) in conjunction with the Paguro gel connectors IP68 (available separately). The light is then screwed into the nylon installation housing available separately. General note on recessed floor lights: To ensure that the floor lights last for a long time, please make sure that they are installed on a suitable gravel bed of approx. 20 - 30 cm depth and that the water drainage is sufficient. Do not install recessed floor lights in holes or basins - standing water should not collect around the light (or in the housing). Click the banner to get it at ONLY: GBP564.9